DENALI’s Driving Light Wiring Kits

Getting the right wiring harness is critical for driving light use. DENALI offers several different options to get the job done right.

Designed to power a pair of Diode Dynamics lights with backlight functionality, this standard wiring harness connects your lights to your vehicle’s wiring for simple operation. Features a waterproof fuse for added protection.

Lightforce 12 Volt 3 Stage Operation Wiring Kit

Lightforce lights were born in Australia, where spotting hazards is often a matter of life or death at night. With kangaroos, feral pigs and cattle roaming the country side (over 1M inhabit Australia), and poor road surfaces, good auxiliary lighting is essential for safety and to keep your vehicle from hitting wildlife or rolling over. The HTX2 light from Lightforce packs a unique feature set into an extremely bombproof housing. It has two circuits, allowing you to run the HID for distance and then turn on the LEDs to bathe your path with a flood of light.

The HTX2 lights include a wiring harness that is very well made, with nice touches like adhesive heat shrink and braided PET sheathing. It terminates to the lights and the sPOD with two hots and ground for each circuit. Lightforce also makes an optional harness that allows you to run the lights off your truck’s factory high beam wires, if that is preferred.

All Lightforce products are backed by a warranty that can’t be excluded under Australian Consumer Law, and the company offers full replacement or refund if their lights fail within a certain period of time or experience significant damage. It’s a great warranty, and one that shows the level of confidence that Lightforce has in their products. Their reputation is driving light wiring kits world class, and their lighting equipment is designed to go the distance in any environment.

Lightforce Venom / Genesis Wiring Kit

The Lightforce Venom LED is a small, powerful and compact auxiliary driving light that delivers exceptional LED performance. Utilising 21 Lumiled LED chips per light, the Venom LED is capable of throwing a beam out to 1 LUX @ 850m, perfect for nudge bars and low profile bullbars. Add the optional combination modular filter to enhance your lighting experience by delivering an impressive 120m wide beam spread. Waterproof, scratch-proof and durable with a hardened lens material design, the Venom LED is designed to endure the harshest conditions.

Utilise the full potential of your Venom or Genesis LED driving lights with this dedicated plug & play wiring harness. Featuring 3 operating modes this harness allows you to easily switch between daytime and night time positioning mode as well as driving lights. H4 and HB3 headlight adaptors allow for easy integration into your vehicles factory headlight circuit.

This harness can be tapped into either the negative or positive switched feed to your gauges, however we recommend tapping a solid green wire behind the dash on a vehicle with a rheostat. It is also recommended to tap into a power supply fuse for your driving lights as this will ensure they are protected from damage. The harness is supplied with all necessary t-taps, crimps and spade terminals for a simple and quick installation.

Roadvision Second Generation Wiring Kit

Roadvision’s second-generation wiring kits have been designed to cater specifically for LED light bars that are 140W and over. Fitted with smart electronics that automatically detect both positive and negative headlamp systems, this simple plug-and-play system removes the guesswork from complex modern headlight wiring configurations. The plug-and-play design also works with halogen, HID and LED bulbs without the need for complicated wiring modifications. Powered by Roadvision’s thermal management technology, the Dominator Extreme II (DX2) Series offers seriously extreme performance that’s ideal for long outback highways. Available in combination beam patterns that deliver a perfect balance of forward penetration and roadside illumination. These driving lights are backed by a seven-year warranty and are compatible with the Roadvision Second Generation Wiring Kit.

Your payment information driving light wiring kits supplier is processed securely.

Saber Universal Driving Light Wiring Harness

For those who are looking for a complete solution to their driving light wiring needs, the Saber Universal Wiring Loom is the answer. Suitable for both twin and single lights, this wiring kit comes ready to install with a high quality cable and fittings. It is designed to power DENALI driving lights (both Standard and Premium) as well as the DataDim dual intensity controller.

This heavy duty single bar lamp harness ensures seamless integration offering a hassle-free installation process with plug-and-play high beam connection. It is compatible with all Saber 140W or greater Light Bars.

It is a perfect accessory for off road vehicles or any automobile that could use a relay to power specific equipment. This wire kit consists of a 12 AWG 2 Lead Wiring Harness, 5 Pin Illuminated On/Off Rocker Switch and pre-installed inline blade fuse. It also includes H4 and HB3 headlight adaptors to allow simple integration into your vehicle’s existing headlight circuit, plus additional terminals for various configurations. The output to the switch is always positive so no changing of wiring or guesswork is required. It is a true plug and play system that works with the BEAST 3-mode smart switch by Lightforce. It is available at Desertcart, a 100% legitimate site that operates in 164 countries and has a good reputation for customer service and safety.