Side Emitting Neon Flex Tape
The side emitting neon LED flex strip has a frosted silicone housing, creating a smooth line of dot free RGBW color lighting. It’s suitable for signage, bars and nightclubs and all kinds of bespoke projects.
It is easy to install and requires no high voltage circuitry or dangerous gases. This makes it a great alternative to traditional neon lighting.
Easy to cut
LED neon flex is an easy-to-install lighting solution that can be cut and extended to fit your project. It can be used in cove lighting, signage, and embedded architectural projects. It offers the look of traditional neon lights without the high-voltage circuitry and dangerous gases. It also offers more controllability and less maintenance.
When cutting a strip of neon flex, it is important to follow the scissor marks on the back of the strip. This will help ensure that you cut the strip correctly and avoid pulling any internal wires. It is also important to make sure that the polarity matches (positive to positive and negative to negative).
Once you have cut your strip to length, close the end of it using an end connector or silicone adhesive sealant. This will keep the exposed circuit protected and waterproof. It is a good idea to test your LED Neon flex before you install it permanently. It is also a good idea to turn off the power at the circuit breaker before you start working on your project.
If your strip doesn’t have a connection point, you can use a jumper connector to connect the two ends of the strip. Be sure to tin the copper pads before soldering, as not doing so can cause the wires to become dead.
Easy to install
Side emitting LED neon flex tape is a popular lighting type that can be installed in a wide variety of settings. It is especially useful in applications where the space does not allow for a traditional neon fixture. Its milky silicone encasing Lights creates a seamless, dot free line of RGB color lighting on walls or curved surfaces. It also has a high CRI, meaning that it renders colors well.
These flex tapes are very easy to install. They are designed with cut marks to make it simple to trim the lengths needed to match your project. You can also easily connect different lengths using jumper connectors or end caps. The connectors are also waterproof, making them suitable for use in damp locations.
You can use these strips on any smooth surface, including wood and plastic. However, it is important to use a strong adhesive to ensure that the strip stays secure. You should also be careful not to bend the strip excessively, which could damage its circuitry.
It is also important to test the voltage of your strip before installing it. This will prevent any problems with power connections or faulty wiring. Then, install the strip in accordance with local electrical codes and make sure that it is plugged into an appropriate outlet. It is important to follow these steps carefully, as improper installation can lead to injuries and fires.
Easy to maintain
The LED neon strip is a great solution for all kinds of lighting applications. Unlike traditional neon lights, it is safe and non-toxic. The LED strip also consumes less power, making it a more efficient lighting option. Additionally, it is easy to maintain. Nevertheless, there are some issues that you need to be aware of when using these lights.
Firstly, it is important to note that neon flex LED strips must be handled with care. While they are designed to bend, you should not force them past their natural diameter or twist them in any way. You should also avoid bending them back on themselves. This can damage the LED chips and prevent them from working properly.
Another common problem with LED neon strip light is that it suddenly starts to turn off. In this case, the first thing you should do is to check that the power source is still working. If this doesn’t solve the issue, you should move the light to a different spot and perform a diagnostic test.
To keep your LED strip in good condition, you should use a silicone sealant to protect it from water. You can find this product in most hardware stores. Make sure to read the label carefully and follow the instructions. After sealing the strip, you should screw in the connectors and use end caps.
Easy to control
LED neon flex strips are a great alternative to traditional glass neon lighting, offering better performance and efficient energy consumption. They are also safer to use and don’t require high-voltage circuitry or dangerous gases. Moreover, they have a much lower luminous decay and are rated for damp locations.
The light bar structure is made of silicon containing a light diffusing agent, which allows the LED to https://signscolor.com/products/energy-saving-neon-lights-with-side-bending-neon-strips/ be bent sideways. It is very easy to cut and extend, and can be used indoors or outdoors. It is also waterproof, making it ideal for a variety of applications. In addition, it can be easily controlled by handheld, home automation, or DMX controllers.
It is important to note that LED neon flex is not designed for permanent bending, as it can cause damage to the strip and silicone neon tube. To avoid this, it is best to use heat-shrink tubing and adhesive when connecting two sections of the strip. This will help ensure the integrity of the strip and reduce follow-up maintenance. Additionally, it will prevent moisture from entering the connection interface. This is an important step in ensuring the long lifespan of your LED strip light. In addition, it will make the installation process easier and faster.