How to Install Left Right LED Headlights
LED headlights have a variety of advantages over traditional bulbs. However, these benefits depend on how they are installed and aimed. This is why it is important to follow the instructions in the installation manual.
Ensure the LEDs have one flat side facing 3 o’clock and the other 9 o’clock. This will help achieve a balanced beam pattern.
High Luminance
There are many factors that contribute to the luminous output of headlights. One of the most important is the LED light chip. It determines not only the wattage but also the beam pattern. When you choose a LED headlight, be sure to check the light chip width. The smaller it is, the more focused the light will be. It will help to avoid blinding oncoming drivers while providing you with quality forward lighting that can reach far down the road.
In addition to the light chip, the arrangement and number of LED lamp beads is also crucial. For example, flip-chip LED bulbs use a rectangular array that can produce wider light beam patterns. This can be helpful for highway driving, where the light needs to cover a greater distance. Some headlights Left Right LED Headlight also feature dual-beam diodes, which combine the high and low beam diodes into a single bulb.
Another factor is the heat dissipation rate of the LED diodes. A high-quality LED headlight will have an efficient cooling system, which will prevent the diodes from overheating and burning out prematurely. This will ensure a long lifespan for your new headlights. Some brands even offer a warranty on their LEDs, which means you can be confident that your new headlights will last for years to come.
Low Power Consumption
Despite the high luminous power, LED headlights consume minimal energy, which saves on vehicle fuel consumption. They also produce less heat, which helps preserve the lifespan of the bulbs. Compared to the traditional car bulbs, these LED lights use up to 50% less energy. They also have a longer service life than the traditional ones.
A good quality LED headlight should have an achromatic beam pattern, meaning that the light is distributed evenly across the entire beam area. An uneven beam can cause glare and may be counterproductive to perceiving detail. Similarly, a bright central spot can blind other motorists. This is why it’s important to choose LED headlights with a narrow LED array.
While there are many different brands of LED headlights available, it’s important to choose one that has been produced by a reputable manufacturer. Poor-quality LED bulbs may not last as long as they should, and they can even damage your car’s electrical system.
Once you have installed your LED headlights, make sure to properly aim them. You can do this by marking the height of your headlights on a piece of tape. Then, compare the marked height to the VOR or VOL markings in your owner’s manual to ensure that you’re aiming your headlights correctly. You can also hire a professional technician to check and adjust your headlights for the best performance.
Wide Range of Beam Patterns
The quality of LED headlight bulbs depends largely on the shape and alignment of the chips inside. The thinner the space between lamp beads on both sides of the chip, the better the light beam pattern. This is especially important because the high-beam cutoff line is usually closer to the vertical zero line than in halogen bulbs. A poor or improperly aimed bulb can cause blinding glare oncoming drivers. To ensure the safety of your car and other road users, choose the right LED headlight bulbs for your vehicle’s projector or reflector headlights.
A good LED bulb should have clean cutoff lines and a wide enough spread to illuminate other vehicles and road signs. In addition, it should have a narrower light led moving head light spot that is not too intense. This is the most effective way to avoid blinding oncoming traffic.
The NG series of LED headlight bulbs from NAOEVO has a rectangular shape with six high-intensity flip chips. This design increases the focus of the high-beam cutoff line and creates a clearer and more uniform light distribution. It also reduces dark spots and improves visibility on the side of the road. Additionally, the 1.5 mm thin copper substrate allows for efficient heat dissipation to keep the LED chip working at a safe temperature. This ensures a long service life.
Easy Installation
There are some variations in how different LED headlights install, but most are basically plug-and-play. Most are a simple matter of removing your old halogen bulbs, line up the tabs on the mounting collar and insert your new LED bulb. Then you just have to twist and lock it in place. Then you can align the bulb to ensure it’s pointing correctly.
With some bulbs, like the GTR Lighting CSP Mini shown here on the left, there are no extra pieces. It’s shaped just like the original halogen bulb, and it comes with a mount that just needs to be pushed in and twisted. Other bulbs, like the Morimoto 2 Stroke shown on the right, do require some extra work to separate them. They also come with a smaller mount that you need to push in and twist, but it’s still very straightforward.
For this video we’re using the SV4 from GTR Lighting, but it works the same with any other H4 LED bulb that you’re going to use on your Veloster VT or Xenon Depot Extreme. Just be sure to pay attention to which side of the bulb is the high beam. If you put it in backwards, you’ll have a terrible looking beam pattern. If you turn it in the correct direction, you’ll have a great looking light.